AERIS A4 · building terrain 000

AERIS A4  /  Uncrewed six-fan survey aircraft  /  Concept

For the hours after a landslide, a flood or a fire. It lifts off a truck bed, maps the whole valley in one sortie, and lands with a new terrain model already in the hands of the people going in.

Sortie
014 Ready
Area
12.4 km²
Contour
0.5 m
Height AGL
120 m
Lines
06

The ground moved.
Redraw it.

Begin sortie

T+00:02 Lift

Six fans. No runway.

  1. 01

    Every blade inside a duct

    Each five-blade rotor turns inside a carbon shroud with a lit rim, so the aircraft can work close to rock faces, tree lines and the people standing at the edge of a site.

  2. 02

    A wing for the way out

    Once moving, a carbon wing with a full-span flap carries the weight. The middle pair of fans rides on tilt shafts in that wing, so the long transit to the first line costs less battery than the climb.

  3. 03

    Sets down on anything flat

    Two skids with four small wheels land on a truck bed, a road or a field, and let a crew of two roll it into position by hand.

  • Ducted fans6Two forward, two mid, two aft.
  • Rotor blades30Five per fan, twisted and swept.
  • Stator slots12Per motor, on an eight-spoke frame.

T+00:09 Survey Simulated

Terrain, redrawn
behind the aircraft.

Line 01 · Hold

Fly the ground, not the pad.

The aircraft holds its height above the terrain itself, so the sensor sits as far from a ridge as from a riverbed and every metre of the valley is measured at the same density.

Line 03 · Compare

Read what moved.

Each line is checked against the last survey of the same ground. Where the surface has dropped or piled up, it is flagged in orange before the aircraft has finished the pass.

Line 06 · Deliver

Hand it over in the air.

Contours, changes and access routes go down to the ground team as each line closes. The first crews move out while the aircraft is still overhead.

Area
00.0 km²
Returns
000 M
Line
01/06
Height AGL
120 m
Progress
00%

T+00:52 Turnaround

Down, open,
up again.

Between sorties the airframe comes apart in four layers, outside in. Hover a part or a tag to name it.

01 / 04 · Fans

Six fan units off the pylons.

Each fan unbolts as one piece. Its shroud lifts away with the light ring, the five-blade rotor and spinner come off the hub, and the twelve-slot stator stays seated on its eight-spoke frame.

02 / 04 · Lift surfaces

Wings in three layers, tail in one.

The skin lifts off an aluminium-ribbed spar box, the flap slides aft, and the wing structure draws out sideways with the tilt shaft that carries the middle fans. The V-strut tail and raised tailplane come away together.

03 / 04 · Shell

The fuselage splits at the seam.

A silver trim line marks the waist. The upper shell takes the wraparound canopy with it, the lower shell drops with the headlights, and the skids come away underneath on their four wheels.

04 / 04 · Core

The reason it flies.

No seats behind the glass. Eight battery modules on copper busbars, a finned power unit feeding six orange high-voltage runs, and a three-unit avionics rack behind twin screens.

Reassembled

Twenty minutes, then airborne.

Thirty-seven assemblies back in place. Swap the batteries, close the shell, and the next line is already loaded.

Turnaround00:00
Assemblies out00/37

T+01:10 Outputs

What lands on the tablet.

A difference surface against the last survey, shaded by how far the ground dropped or rose. Scars, slumps and debris fans read at a glance.

  • Slumps
  • Debris fans
  • Bank collapse
  • Subsidence

File Airframe

The airframe file.

  • 0assemblies
  • 0ducted fans
  • 0rotor blades
  • 0battery modules
Propulsion
Layout
Six ducted fans, three per side
Rotors
Five-blade, twisted and swept, inside carbon shrouds
Motors
Twelve-slot stators on eight-spoke frames
Mid pair
Carried on tilt shafts in the wing
Lighting
LED ring on every shroud, twin headlights
Structure
Fuselage
Carbon upper and lower shells, split at the waist
Canopy
Wraparound glazing over the systems bay, no crew
Frame
Aluminium bulkheads and longerons
Wing
Carbon skin over a spar and four ribs, full-span flap
Tail
V-struts with a raised tailplane
Landing
Two skids, four wheels
Power and systems
Battery
Eight modules on copper busbars
Distribution
Finned power unit, six high-voltage ports
Cabling
A dedicated HV run to every motor
Avionics
Three-unit rack, twin screens
Cooling
Tail-cone radiator on a coolant loop
Not yet established
Span
Not measured
Takeoff weight
Not measured
Endurance
Not measured
Cruise speed
Not measured

Debrief Next sortie

Fly the valley
before you walk it.